|
|
 |
|
|
| Osx86 - Mac OSX on PC Hardware |
 |
Building a fast & cheap Mac PC from hardware which
works with OSX out of the box. For more info,
please goto http://www.osx86project.org and look
up the wiki on OSX86 to see what PC hardware will
work with OSX. Also goto the URL above for
questions concerning dual boot, etc.
Also see this great write up on a cheap $200 OSX86
machine here:
http://www.i-hacked.com/content/view/202/42/
Only thing that needed help was the sound
hardware, and even the Network card came up in OSX
as an Apple device. My wireless also wasn't
supported, so no airport :( But - goto the OSX86
wiki, from what I've read there are several wifi
cards that work! In fact in one of my more recent
videos I show you can make a Belkin PCI card work
as the Airport wifi hardware.
I've also tested my USB HP Officejet printer
(w0rks perfect!)
My Sony Digital Camera (w0rks perfect!)
Burns DVDs / CDs
iTunes Works perfectly
Built in Firewire port? / cannot connect my
digital video camera
An even Cheaper solution to building one of these
is to use a Celeron w/ SS3
You will have to either have two disks, or
partition your HD into two drives to make this
dual boot setup I have work, then modify your
windows boot.ini startup file so you can boot
between OSX & XP like shown in this video.
Please don't ask me how to make it work, or where
to 'find' OSX86. It's on
torrentportal.com/torrentz.com (& virtually aLL
the tOrrent sites) -- the answers to your
questions are in both the wiki and in the forums.
This system (does not hang on hardware, etc.) it's
very stable once you modify kext drivers and
remember to use hardware which is in the OSX86
wiki... See my other video on getting a Belkin PCI
wireless card to work as an Airport & enjoy your
hackintosh PCs!
Tags : OSX PC osx86 hacking apple hardware hack hackintosh macintosh mac os |
|
Affichage : 127717
Durée : 107 s |
| Mac on PC - OSX86 |
 |
****UPDATE AT BOTTOM****
This is a very thrown togeather and cut up video
of me installing OS X Leopard on my PC.
I apologize for the horrid editing, but I am
tired, I have been doing this for about a week so
I figured I would just get something up here. I
will go into more details later when I get
everything working better and will post a better
video.
I am very sleep deprived and thus am very spacey
in the videos and what not.
PC Specs
MSI K8 Neo4 Platinum
AMD Athlon 64 X2 3800+ Toledo 939-pin
4GB RAM
Rosewill Z3 92mm heatsink
ATI Radeon HD 2600 XT PCIe 512mb GDDR3
320GB SATA Western Digital ( XP Media Center )
40GB Maxtor IDE ( Leopard )
Realtek AC'97 Audio
Marvel Yukon Gigabig Ethernet
nVidia Gigabit Ethernet
Please don't ask me how I did it, because I WILL
be posting that later, just keep your eyes open
for it. I still have work to do on it myself.
------------------
I have posted a quick how to since I hace said I
will show you how I got it working. IT isn't very
in depth, but it is a basic FYI and I WILL be
doing a more detailed video in the future.
http://www.youtube.com/watch?v=pf780pgfN1A
Update 2
-----------------
The three part how to is posted in my videos :D
Enjoy
Tags : computer OSX Leopard OS OSX86 hackintosh AMD Athlon 64 maconpc cyberia cyberdude4819 mod mods case |
|
Affichage : 5059
Durée : 592 s |
| OSx86 |
 |
Mac OS X 10.4.6 running on a Dell computer. I just
started playing with GarageBand, I don't know how
to make anything with it yet. :P
Tags : OSX DELL |
|
Affichage : 3432
Durée : 320 s |
| Mac OS x86 |
 |
Mac OS Tiger on Benq Joybook R55 !express#
!metadata#!version#v1.0.r291!/version#!format#1.00
1!/format#!totalTime#47934!/totalTime#!width#400!/
width#!height#300!/height#!maxSceneSize#0!/maxScen
eSize#!clientPublishTime#Wed Jul 25 00:13:42 GMT
0000 2007!/clientPublishTime# !/metadata#
!scenes#!scene/#!scene/# !/scenes# !asset
path="finished/A09DDBC37E6DC123-3F9A0E79303EA332.f
lv" type="VideoContent" desc=""#!stamp time="0"#
!mute#false!/mute# !height#300!/height#
!display#true!/display# !position#0!/position#
!width#400!/width#
!volume#0.75!/volume#!/stamp#!stamp time="47934"#
!display#false!/display#!/stamp#
!/asset#!/express#
Tags : mac os leopard x86 pc hackintosh desktop |
|
Affichage : 2020
Durée : 47 s |
| HP tx2000Z OS X86 Leopard 10.5.2 First MAC TABLET ! |
 |
Update::::4/16/08
Since Iv posted this, its gotten quite a few views
(more than I expected), so I feel their is a good
deal of interest in people doing this mod
themselves. It gotten alot easier since I first
did itso here are the simplified instructions
(faily tx2000z specific):
1)Make a partition ~10gb
2) Restart computer with LEO4ALL DVD, so much
easier than the zepherous DVD for the tx series.
3) Press f9 to boot from cd, choose boot from cd
4)It will start to load and then stop, slide the
power button once or twice, it will continue.
5)When you get into the install screen, go to disk
utility (somewhere at the top) and choose your
10gb partition and erase it and change it to a
journaled partition.
6)Exit that and continue with install, choose
correct partition but go to settings/options.
7)Choose AMD patcher and anything else you think
will work (nothing else really worked for me).
8)install.
9)Pretty good chance it wont boot when you
restart. You need to insert your windows recovery
cd and fix the boot order. You may have to go to
command line and make your first windows partition
active using disk part (google for instructions)to
be able to fix the boot order.
9)reboot and you can choose to boot into windows
or NST MAC of something like that. Windows should
work and choosing mac and the the second or third
partition option on the next screen should boot
you into mac.****
**** You may have trouble setting mac up. This at
least means your close. If it goes into a setup
loop, just type "Graphics Mode"="640x480x32". It
should change the resolution and bypass the setup
screen. You only have to do that once and it auto
setsup and root account.
You're done.
Ryan
This too me forever to get running. As alot of
people know, a few gurus have been working hard to
get Leopard running on regular PCs. You usually
have to have special hardware (like specific
motherboards etc). However after many many hours
of work I got it to run on the super propriatary
HP TX2000Z. It is HPs new tablet, and it makes it
the first tablet MAC that Iv seen anywhere!!!!
I followed the Nihilist guide (which looks to have
been taken down). I installed to my desktop which
was much easier (becuase its custom built with
hardware that is compatible). After you do one or
two of these installs then you may try one on a
brand name laptop. All laptopo are different too,
some much easier and other impossible. Anyway
whats different from this pc from you average
laptop install is the following:
1) You need to press f9 in bios startup to choose
boot from cd everytime you startup from the
install iso.
2) I had to use the zepheryth (spelling?) ISO
becuase this was a AMD install which is a modified
kalyway disk. You may have to try several time to
get a working install because there are several
configs to choose from. Make sure you install
darwin boot loader if vista is already installed.
3) When the disk is first booting (after you told
the bios to boot from cd), you MAY need to slide
the power button on the laptop over to get it
reading from the disk. Its weird but is a sata
pata hdd controller issue. Im not sure why it
works, i figured it out on accident becuase i was
giving up and trying to turn my laptop off.
3) Once everything is installed you may have to
lower the resolution the first time to get the OS
X to boot because this will disable the setup
mode. You have to disable setup to avoid
'transferring from tiger' unless you have an old
tiger setup readliy available. NOTE: i also had to
command line it to think the install was already
completed. I had to google for instructions on how
to do this, was tough to find.
Anyway all of this is from memory from a month
ago, good luck. Let me know if you get it working!
Also...sadly my install stopped working when i
tried to Nject drivers for nvidea. Dont do that
unless you know more than i did about it! Dont
have the patientce to get it working again.
Ryan
Tags : Tablet MAC Leopard TX2000z HP OSX86 |
|
Affichage : 21706
Durée : 61 s |
| OSx86 Triple Boot (Vista, Ubuntu) GRUB + Working EFI |
 |
This is basically my experience and setup of a
functional triple boot.
Firefox is not the reason the cursor creates
artifacts. This is due to the Intel Graphics Card
not working correctly because the driver is
designed for the mobile chip.
I used two hard drives:
- 1 with Ubuntu Linux 7.10 + Vista [Prim]
- 1 with Osx86 (kalyway) [Sec]
Grub bootloader modified to boot into the EFI
setup on the OSX partition by default.
----
Gateway GM5442 (http://tinyurl.com/34qz3r)
Intel Core 2 Duo E4400 (2.0 GHz)
2GB DDR2 533MHz
500GB + 120 GB SATA HD's
Intel GMA 950 Graphics
10/100 Mbps Lan (Works on Vista + Ubuntu, not
osx86)
Integrated 8-Channel Sigmatel Audio (Works on
Vista + Ubuntu, not on osx86)
USB 2.0 Bluetooth Adapter (Works on Ubuntu +
osx86, not on Vista)
USB 2.0 Ethernet Adapter (Works on osx86, not on
Vista + Ubuntu)
USB 2.0 Audio Adapter (Works on osx86 + Vista, not
on Ubuntu)
Full documentation can be found on my website:
http://tinyurl.com/33kw3a
Tags : osx osx86 intel hackintosh triple boot grub efi pc kalyway |
|
Affichage : 9293
Durée : 623 s |
|
|
|
|
|
|
|
|
|
|
 |
| |
|
